HCM: (028) 3822 8680 | HN: (024) 3634 3953 | info@yaskawavn.com

Home / Handling Robots

Handling Robots

A complete lineup that help to build an optimum facilities.

The world’s highest speed performance    

The DX200 new robot controller brings out the maximum performance in speed and torque from the new servomotors on the robot’s axes and increases the motion speed of each robot’s axis. This greatly reduces the cycle time in various applications.

Save Space and Energy

The slimmer structure, new features and high performance enable you to downsize production facilities and save energy.


Best Performance in its class

The highest speed in the world has been achieved by using high-speed, low- inertia AC Servomotors and state-of-the-art control technology. A slimmer robot form has also been developed, while wrist allowable inertia has been increased.

Applicable in Severe Environment

The waterproof and dustproof structure (IP67 class level)*¹ at the wrist part enables the robot to operate in environments subjects to waterdrops and dust. *1: Available as an option for MH5S, MH5LS,MH6 and MH6S

DX200 Controller

Dynamic Energy-efficient multiple Robot Controller




No Deviation from Track at Emergency Stop

The Robot stops on the taught path at emergency stop and will deviate from the path when restarting, preventing interference of the Robot with nearby obstacles.

Playback path confirmation

The playback path mode during a test operation can be confirmed by low speed test operation. This mode of teaching operation with the optimum path in minimal time possible while verufying the existence of interference with workpieces or jigs.

Interference Checking Function (Optional)

Interference between arms of densely installed Robots can be constantly monitored to automatically stop movement if a collision is likely to occur. (This prevents collisions between Robots caused by programming mistakes.) Constantly checks the interference between the robot arm ad up to 16 defined cubes to prevent the robot to collied with workpieces or peripheral jigs.

Minimized Safety Barrier(Optional)

The functional safety unit , which is configured with the redundant CPUs minimizes the area within the safety barrier by restricting the robot's operating area.

         •Safety barrier can be limited to only a minimum area to downsize production facilities

         •Zone limit switches can be eliminated for Robots in setting process.

Saving Energy

The servos are turned OFF automatically when the Robot is stopped for long period of time. Twenty four hour operation in which Robot is operating for 16 hours and on stand by for 8 hours




Related Information Menu